一个改进的软件过程工程元模型ISPEM

对象管理组织(OMG)提出的软件过程工程元模型(SPEM)在软件工程过程领域具有较强的通用性和较好的建模能力。但是，软件过程工程元模型在一致性和表达力上存在不足。本文基于UML2．0活动元模型改进SPEM中活动的语义，采用泛化机制扩大实参的表达范围，细化形参和限制的表达粒度，使得改进的软件过程工程元模型(ISPEM)在语义上与软件工程过程领域的语义更为一致，表达力更强，更加符合软件工程过程领域建模的需要。     

Design-to-Cost Applied Within an Integrated System Model

In an environment of declining financial budgets for space projects, new approaches - such as Design-To-Cost - are being implemented to improve today's satellite design processes. Using an example of a current mission (the power subsystem of the Solar Probe spacecraft) under study at NASA's Jet Propulsion Laboratory, the main part of the paper discusses an Integrated System Model (structured into a performance model, a cost model, and an effectiveness model) that is part of a model-based design process used to perform cost-effectiveness trades. A simulation tool is used during the first step to size the components of the power subsystem, and then simulate its performance during operation. The determined dimensions are transferred into an EXCEL^TM-spreadsheet and linked to the components' costs. With a cost accounting tool that combines cost estimating relationships with the Work Breakdown Structure of the power subsystem, the life-cycle cost of each alternative design concept is computed. To determine the cost-risk of the different design alternatives for each component, cost probability distributions are introduced. By performing Monte-Carlo simulations, cost sensitivities are revealed. In the next step of the trade study process, the effectiveness of the alternatives is analyzed. Having determined cost and effectiveness, estimates can be made for where the different alternatives lie in the design space. The last part of the paper identifies the main drivers for the spacecraft's performance and cost. Finally it is shown how the mission design benefited from the Integrated System Model and from the application of Design-To-Cost.     

人体热调节的有限元分析

本文根据人体的热调节机制建立了二维人体热调节的有限元模型，并设计了相应的实验对该模型进行了验证，实验结果与计算结果吻合较好，本模型对于以人体－环境热交换为内容的工程实践和理论研究有较高的应用价值。     

飞机生产中产生不协调问题的原因及解决办法

根据笔者多年来从事工艺技术的经验，总结了在飞机生产中，由于协调路线设计不合理、铆接装配变形、温度影响、在重量作用下引起的变形以及误差积累所产生的不协调问题，并结合具体的实例对上述不协调问题产生的原因提出了解决的办法。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.     

Formation of Giant Planets– An Attempt in Matching Observational Constraints

We present models of giant planet formation, taking into account migration and disk viscous evolution. We show that migration can significantly reduce the formation timescale bringing it in good agreement with typical observed disk lifetimes. We then present a model that produces a planet whose current location, core mass and total mass are comparable with the one of Jupiter. For this model, we calculate the enrichments in volatiles and compare them with the one measured by the Galileo probe. We show that our models can reproduce both the measured atmosphere enrichments and the constraints derived by Guillot et al. (2004), if we assume the accretion of planetesimals with ices/rocks ratio equal to 4, and that a substantial amount of CO₂ was present in vapor phase in the solar nebula, in agreement with ISM measurements.     

LYAPUNOV-TYPE STABILIZATION FOR NONLINEAR UNCERTAIN SYSTEMS AND NONLINEAR H~∞ CONTROL

ＬＹＡＰＵＮＯＶ┐ＴＹＰＥＳＴＡＢＩＬＩＺＡＴＩＯＮＦＯＲＮＯＮＬＩＮＥＡＲＵＮＣＥＲＴＡＩＮＳＹＳＴＥＭＳＡＮＤＮＯＮＬＩＮＥＡＲＨ∞ＣＯＮＴＲＯＬＦｅｉＳｈｕｍｉｎ（ＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｏｆＡｕｔｏｍａｔｉｏｎ，ＳｏｕｔｈｅａｓｔＵ...     

尾喷口机构的伺服力加载系统研究

对飞机尾喷口鱼鳞片伺服机构的地面伺服力加载系统作了分析，给出了以压力伺服间组成系统的实用工程设计方法，提出了带有余度性质的技术措施。在压力问实测参数的基础上进行仿真研究，取得了满意的结果。     

多层模糊逻辑控制器的设计

本文提出一种适合于多输入多输出(MIMO)系统的多层模糊逻辑控制器(MLFLC)，该控制器由若干个多输入单输出(MISO)模糊控制器构成，每个MISO模糊控制器由许多单输入单输出(SISO)模糊控制器组成。该控制器采用互补型隶属函数，具有一组零控制面，只要使量化因子满足一定的条件，控制系统就是渐近稳定的。最后将上述控制器用于二节机械手中进行仿真试验，验证了上述算法的可行性和有效性。     

求解含多个右端向量非对称线性方程组的自适应块拟最小残量IOM(q)算法

许多实际应用问题需要求解含多个右端向量的大型非对称线性方程组 ,通常是把原来方程组分成单独几个含一个右端向量的方程组 ,再用某种迭代法分别单个求解 ,而更加经济有效的方法是应用能同时产生几个迭代向量的块迭代法来直接求解。本文在 IOM(q)算法的基础上 ,提出一种求解此类方程组的块拟最小残量 IOM(q)算法 ,讨论了如何收缩掉已收敛的部分方程组以及如何从产生的块 Krylov序列中删除线性相关或几乎线性相关向量的自适应技术。数值试验表明 ,此新的自适应块算法比块 GMRES算法及其他相关算法具有更好的收敛行为、更少的计算量和 CPU计算时间 ,是求解此类方程组的一种更加经济有效的算法。